TILE SPECIFICATION FORM (required for each type of tile)
PROJECT:
DISTRIBUTOR:
MANUFACTURER:
PRODUCT
COLOUR/NUMBER:
SIZE:
Check the following appropriate categories:
| GLAZED | SEMI/MATT GLAZED | UNGLAZED | |||
| EXTRUDED | PRESSED | OTHER | |||
| VITREOUS | SEMI-VITREOUS | NON-VITREOUS |
Meets the National Standard of Canada: CAN/CGSM-75.1-M88 Type #1-7)
| CLASS | MR1 | MR2 | MR3 | MR4 | ||||
| CR1 (Acid Proof) | ||||||||
| LOCATION | FLOOR TILE | FLOOR & WALLS | WALLS ONLY |
| FLOOR TILE SLIP RESISTANCE | WET | DRY | ||
| FLOOR OR WALL TILE FOR EXTERIOR USE LESS THAN 3% WA | YES | NO |
The product described above is recommended for the following types of intallations:
| RESIDENTIAL ONLY | PEI | MOHS | |||||
| LIGHT COMMERCIAL | PEI | MOHS | |||||
| HEAVY COMMERCIAL | PEI | MOHS | |||||
| WET AREA FLOORS | RESIDENTIAL | POOL DECKS | SHOWERS | ||||
| EXTERIOR PAVING | PUBLIC WASHROOMS | ||||||
| ACID RESISTANT FLOORS | ACID PROOF FLOORS | ||||||
| ACID RESISTANT WALLS | ACID PROOF WALLS | ||||||
| EXTERIOR PAVING | COVERED | UNCOVERED | |||||
| EXTERIOR WALLS/PLANTERS, ETC. | |||||||
| TREADS & RISERS |
Use this data sheet to compare technical aspects of various products to determine which will give the most accurate analysis when considering approval of an equivalent or alternative tile material. Specify the Technical Inspection Program to ensure material and installation is as specified and meets industry standards.
